English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
-
The water leg type vacuum dewatering box in the fourdrinier paper machine 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a low-vacuum (20-100 mm water column) box. It is fixed on a closed box by several panel strips with sharp front edges. Wide box surface. The panel ...
-
The whole stainless steel body ceramic baffle wire deviation sensor Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device ...
-
The customized felt sensor tin bronze / stainless steel valve body Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device ...
-
The stainless steel metal hose matched with the rotary joint for the dryer QS-GF type rotary joint (65-100) Scope of application: Maximum speed: ≤100RPM Maximum temperature: ≤220 ℃ Maximum pressure: ≤1.8MPa Applicable medium: saturated steam, superheated steam, superheated water
-
The tin bronze valve body paper making felt sensor to correct the running direction Technical Parameters: Stand size: 600mm x 500mm Material: The valve body is made of national standard tin bronze, the valve core is 304 stainless steel, the bracket is stainless steel, and the bottom plate is carbon ...
-
stainless steel plate cylinder mold for the wet paper forming The cylinder mold is the main component of the web forming in the cylinder paper machine. stainless steel plates cylinder mold Cast iron spokes, thickness 40mm, spoke pitch 180mm, stainless steel rods, and stainless steel belt width 1.5mm...
-
Craft Paper Making Machine Suction Box FRP Matrix 304 S.S Body Ceramic Faceboard 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a low-vacuum (20-100 mm water column) box. It is fixed on a closed box by several panel strips with sharp front edges. Wide box surface. The panel ...
-
Type280 stainless steel dump rejector for the paper pulp cleaning I. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The feed concentration is about 1-3%, the slag discharge concentration can reach 20%, the ...
You Might Be Interested In
